DSC PC15OO Installation Manual Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
10
Binary Data Display
Zone lights 1 through 4 are used to display the value, in binary
format, of the data as shown in the table below.
Hex Data Entry*
Value
Zone 1
Zone 2
Zone 3
Zone 4
Light On
Light Off
* See Hex Data Entry instructions
HEX Data Programming
Certain programming entries may require the entry of data in
HEX (hexadecimal, or base 16) format. HEX numbering uses
the digits 0 through 9 and the letters A through F.
The letters A through F are represented by the number keys
1 through 6. To enter data in HEX format, first press the [
]
key. The Ready light will flash. Enter the HEX value, then
press the [
] key again to return to the normal entry mode.
The Ready light will stop flashing.
To enter HEX numbers:
A Enter [
][1][
]
B Enter [
][2][
]
C Enter [
][3][
]
D Enter [
][4][
]
E Enter [
][5][
]
F Enter [
][6][
]
Enter [
] before
and after
each digit. The last digit in each
section does not require the final asterisk ([
]) to be entered.
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Comments to this Manuals

No comments