DSC PC5020 Installation Manual download pdf (Page 19)

select Partition 1 (see section 4.4 Global and Partition Keypad Opera-

tion on page 15).

[02] - Select Partition 2

Provides an easy way to select Partition 2. This is the same as press-

ing and holding the [#] key then pressing and holding the [2] key to

select Partition 2 (see section 4.4 Global and Partition Keypad Opera-

tion on page 15).

[03] - Stay Arm

Same as described in Function Keys - Section 3.5.

[04] - Away Arm

Same as described in Function Keys - Section 3.5.

[05] - [*]+[9] No-Entry Delay Arm

After this function key is pressed the user must enter a valid access

code. The Partition will arm and remove entry delay from the parti-

tion when the exit delay expires (see section [Q] [9] Arming Without

Entry Delay on page 13).

[06] - [*]+[4] Door Chime On/Off

This function key provides the user a simple method for turning the

Door Chime feature on and off (see section [Q] [4] Door Chime On/

Off on page 11).

[07] - [*]+[6]...[4] System Test

This function key provides the user with a simple method for testing

the system (see section [Q] [6] User Functions on page 12). A valid

Master Code is required to perform this command.

[08] - [*]+[1] Bypass Mode

This function key provides the user with a simple method for enter-

ing the Bypass Mode. If a access code is required it must be entered

before bypassing can be performed (see section [*][1] Zone Bypass-

ing on page 10).

[09] - [*]+[2] Trouble Display

This function key provides the user with a simple method for enter-

ing the Trouble Display Mode (see section [*][2] Trouble Display on

page 11).

[10] - [*]+[3] Alarm Memory

This function key provides the user with a simple method for enter-

ing the Alarm Memory Display Mode (see section [Q] [3] Alarm

Memory on page 11).

[11] - [*]+[5] Programming Access Codes

This function key provides the user with a simple method for pro-

gramming access codes. After this key is pressed a valid System Mas-

ter or Supervisor Code will have to be entered before the panel will

allow programming to be performed (see section [Q] [5] Program-

ming Access Codes on page 12).

[12] - [*]+[6] User Functions

This function key provides the user with a simple method for pro-

gramming User Functions. After this key is pressed a valid System

Master or Partition Master must be entered before the panel will

allow User Functions to be performed (see section [Q] [6] User Func-

tions on page 12).

[13] - [*]+[7]+[1] Command Output Option 1

This function key provides the user with a simple method for activating

a PGM Output programmed as Command Output Option 1 (See Sec-

tion 5.8 Programmable Output Programming PWS Sect 8). By

default, after this key is pressed a valid access code must be entered

(see section [Q] [7] Command Output Functions on page 13).

[14] - [*]+[7]+[2] Smoke Detector Reset

This function key provides the user with a simple method for activat-

ing a PGM output programmed as either option [03] Sensor Reset or

[20] Command Output option 2.

[15] - General Voice Prompt Help

This feature can only be programmed if both the Escort5580 and the

PC5936 Audio Matrix module are being used.

When the function key is pressed, the intercoms will perform a Help

page. The user must then press the Page/Answer button on any

intercom station to begin the help session with the Escort.

For more information, Refer to the PC5936 Installation Manual.

NOTE: While the voice prompt help is active, users will not be able

to disarm the system using Wireless Keys.

[16] - [*]+[0] Quick Exit

Same as described in Function Keys - Section 3.5.

[17] - [*]+[1] Reactivate Stay/Away Zones

This function key provides the user with a simple method for adding

Stay/Away zones back into the system (see section [*][1] Zone

Bypassing on page 10).

[18] Identified Voice Prompt Help

This feature can only be programmed if the Escort5580 and the

PC5936 Audio Matrix module are being used.

When the function key is pressed, the Escort will begin a help session

from the intercom station programmed as closest to the keypad. In

order for this option to function, you must program PC5936 Section

[802], subsection [14] “Keypad Port Assignments.” For more infor-

mation, Refer to the PC5936 Installation Manuals.

NOTE: This function key cannot be programmed for PC55XXZ LED

keypads with software version 1.0.

NOTE: While the voice prompt help is active, users will not be able

to disarm the system using Wireless Keys.

[19] - [*]+[7]+[3] Command Output 3

[21] - [*]+[7]+[4] Command Output 4

Function Keys [19] and [21] provide the user with a simple method of

activating an output programmed as Command Output Option 3 or 4.

[22] - Active Camera Monitor Selection

This function key is for use with the PC5108L Downlook Interface/

Camera Monitor Module. For instructions on the function key use,

see the PC5108L Installation Manual.

[23] - Bypass Recall

Pressing this function key will recall the last group of bypassed zones.

The function key will follow the Code Required for Bypass option. If

the option is enabled, a valid access code with the Bypass attribute

enabled must be entered after the function key is pressed. For instruc-

tions on zone bypassing, see the Power864 Instruction Manual.

[24] - Recall Bypass Group

This function key will recall zones in the Bypass Group for the parti-

tion. This group is programmed by the user in the [*][1] Bypass

menu. The function key will follow the Code Required for Bypass

option. If the option is enabled, a valid access code with the Bypass

attribute enabled must be entered after the function key is pressed.

For instructions on zone bypassing and programming Bypass Groups,

see the Power864 Instruction Manual.

[25]-[26] - For Future Use

[27] - Select Partition 3

[28] - Select Partition 4

[29] - Select Partition 5

[30] - Select Partition 6

[31] - Select Partition 7

[32] - Select Partition 8

These keys provide users with an easy way to select one of the above

partitions. For example, this is the same as pressing and holding the

[#] key, then pressing and holding the [3] key to select Partition 3

(see section 4.4 Global and Partition Keypad Operation on page 15).

WWW.DIYALARMFORUM.COM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 52 53

Comments to this Manuals

No comments

DSC PC5020 Installation Manual Page 19

Comments to this Manuals

Related products and manuals for Security access control systems DSC PC5020