DSC PC5020 Installation Manual download pdf (Page 30)

Programming Sections: 5.3 Basic Programming PWS Sect 3

Option Definition On/Off Description

2 Verbal Door Chime ON Verbal Door Chime is Enabled. The system will verbally annunciate the zone (or programmed

label) when it is violated if Door Chime is programmed.

This feature is available when ESCORT5580 v3.00, and the PC5936 v1.00 are used. This feature

enables the Door Chime to verbally annunciate the Zone that has been violated instead of a series of

beeps, If the Verbal Chime Feature is enabled, whenever a zone with the Chime attribute enabled is

violated, a series of beeps will sound and the system will verbally prompt “Zone X”. When the zone

is restored, the system will sound a series of beeps. For example, if label is programmed for the above

Zone, the system will verbally annunciate (after the beeps) “South Bedroom Window”. See associ-

ated Installation Manuals

NOTE: Only beeps are annunciated on a zone restore.

OFF Verbal Door Chime is Disabled. The system will only annunciate a series of beeps whenever a zone

programmed for Chime is either violated or restored. This option is defaulted OFF.

3 Verbal Alarm ON Verbal Alarm is Enabled. The system will verbally annunciate audible zone alarms via their zone

number (or programmed label) in conjunction with the Bell Outputs.

This feature is available when the ESCORT5580 v3.00 and PC5936 v1.00) are used. This feature

enables verbal annunciation of alarm conditions on the system. When an audible non-fire zone goes

into alarm with this feature is enabled, the PC5020 will sound the alarm condition via the Bell Out-

puts, but every 15 seconds (as programmed in the Alarm Tone Period – Section [178]) it will silence

the bell outputs and the PC5936 speakers will verbally annunciate the alarm condition “Alarm Zone

4” or, if the label is programmed, “Alarm South Bedroom Window”

When the zone is in alarm, the software automatically inserts the word “Alarm” in front of the

appropriate zone label.

When an audible fire zone goes into alarm, the system automatically inserts the words “Fire” and

“Alarm” in front of the appropriate zone label (“Fire Alarm Zone 4” or “Fire Alarm South Bed-

room Smoke”).

If there are multiple alarms, the system will annunciate the first and latest zone that has gone into

alarm.

NOTE: Fire annunciation always overrides any Burglary Zone alarm annunciation. Ver-

bal Alarm will cease with the Siren at Bell Time Out.

OFF Verbal Alarm is Disabled. The system will only annunciate via the Bell Outputs during an audible

alarm condition. This option is defaulted OFF.

4 Waterflow Silence

Inhibit

ON Water-flow Silence Enabled. An Instant or Delayed 24Hr Water-flow alarm can not be silenced by

any means (including Bell Time Out) until all Water-flow zones on the system are restored.

OFF Water-flow Silence Disabled. Alarms can be silenced whether a Water-flow zone is open on the

system or not. This Option is OFF at default.

5 Keypad Buzzer

Alarm

ON Keypad Buzzer Follows Bell Enabled. The keypad buzzers will follow the selected partition’s bell

activity.

OFF Keypad Buzzer Follows Bell Disabled. The keypad buzzer will not follow all bell activity. Only

alarms designated to activate the keypad buzzer will do so. This option is OFF at default.

6 Cross Zoning /

Police Zone Select

ON Cross Zoning is Enabled. The panel will use the Cross Zone Attribute for Burglary Verification.

This feature requires two or more trips on a zone(s) specified as “cross zones” within a specified time

before starting an alarm sequence. See Section [101],Option 9, Pg 33.

When a zone with the Cross Zone Attribute Enabled is violated, nothing occurs on the local premises

(except Entry Delay, if applicable) and the Cross Zone Timer commences. If another Zone with the

Cross Zone attribute enabled is violated before the timer expires, the panel will transmit the first

alarm signal, a Cross Zone event , followed by the second zone alarm, and begins the appropriate

local alarm sequence. If no other zones are violated before the timer the expires, no alarm sequence

occurs and an Alarm Not Verified event is logged. If the Double Hit Feature is enabled (Section [017],

Option 4), the panel will react on two violations of the same zone during the Cross Zone Timer (Sec-

tion [176]) for starting an alarm sequence.

This option is dependent on the programming of the Burglary Verification Options (Section [018],

Option 6). It is not enabled if Police Code is enabled.

This option will not function on zones that do not log alarm events (e.g. While disarmed, Day Zone,

Instant zone, etc.)

NOTE:The Cross Zone/Police Code Timer is in Seconds for Cross Zoning and in Minutes for Police

Code.

NOTE:No fire zones types should use the Cross Zone Attribute.

OFF Police Code is Enabled. The panel will use the Police Code feature for Burglary Verification. This

option is OFF at default.

7 Exit Delay Restart ON One Time Exit Delay Restart on Delay zone re-entry Enabled. If a Delay zone is violated and

restored during the Exit Delay, it is considered an exit. If a delay zone is violated again it is considered

a re-entry. With this option enabled the panel will restart the exit delay. Further violations and

restores of delay zones will not restart the exit delay. NOTE: Option is ON by default.

OFF One Time Exit Delay Restart on Delay zone re-entry Disabled. Delay zone violations and

restores will not restart the exit delay.

NOTE: The exit delay can only be restarted once. This includes restarts from Away func-

tion keys.

8 AC Trouble Beeps ON AC Trouble Beeps Enabled. When an AC trouble occurs on the panel, all keypads will sound an

audible trouble indication (2 beeps every 10 seconds)

OFF AC Trouble Beeps Disabled. AC troubles will remain silent. This option is OFF at default.

WWW.DIYALARMFORUM.COM

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 52 53

Comments to this Manuals

No comments

DSC PC5020 Installation Manual Page 30

Comments to this Manuals

Related products and manuals for Security access control systems DSC PC5020