Keypad Commands: 4.4 Global and Partition Keypad Operation
15
4.4 Global and Partition Keypad Operation
A global keypad will display limited information until a partition is
selected: the Trouble light will turn on if a trouble condition is present,
and the Armed light will turn on if all the partitions are armed. To
select a partition the user must press and hold one of keys [1] - [8] for
two seconds, depending on which partition they want to access. (e.g.
press and hold [2] for Partition 2). The keypad will then display the sta-
tus of the selected partition and allow normal operation.
A Partition keypad will display the status of the Partition it is assigned
to. A user with access to more than one partition may temporarily
assign the keypad to another partition to gain access. To do this the
user must first press and hold the [#] key for two seconds. The key-
pad will go blank. The user must then press and hold one of keys [1]
- [8] for two seconds, depending on which partition they want to
access (e.g. press and hold [2] for Partition 2). The keypad will then
display the status of the selected partition and allow normal access.
4.5 Features Available for the LCD5500Z
These features are only available for LCD5500Z keypads with zone
inputs:
Automatic Scrolling of Open Zones
The LCD5500Z keypad (v3.xx) automatically scrolls through open
zones while the keypad is idle. This feature, if enabled, will override
the clock display. This option can be programmed in LCD program-
ming section [076], option [8].
Automatic Scrolling of Alarms in Memory
The LCD5500Z keypad allows automatic scrolling through alarms in
memory while the keypad is idle. This feature, if enabled, will over-
ride the clock display. This option can be programmed in LCD pro-
gramming section [076], option [4].
24 Hour Time Display Option
The LCD5500Z can be programmed to display time using a 24- hour
clock, instead of a 12-hour, a.m./p.m. clock. This option can be pro-
grammed in LCD programming section [076], option [3].
Keypad Zones
See Section 2.11 ”Keypad Zones” on page 8.
Viewing Troubles While Armed
See Section ”[*][2] Trouble Display” on page 11 for information on
how to view troubles.
Backlighting Boost (available for all zone input key-
pads)
The LCD5500Z and PC55XXZ zone input keypads will provide extra
number pad lighting when any key is pressed. The backlighting
boost will last for an additional 30 seconds after the last keypress.
Prompts for the following features are only supported
by LCD5500(Z) v2.x and higher:
• Downlook Support (DLM-4L/PC5108L): Active Camera Monitor
Selection, Remote Trigger
• Auto Arm features: Late to Close, Auto Arm Postpone/Cancel,
Auto Arm by day
• Bypass groups
WWW.DIYALARMFORUM.COM
(12 pages)
(8 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals