DSC PC 5010 Specifications download pdf (Page 9)

G E T T I N G S T A R T E D

2.6 Keypad Assignment

There are 8 available slots for keypads. LED keypads by default are always assigned to slot 1 while the

LCD5500Z is always assigned to slot 8. Keypads can each be assigned to a different slot (1 to 8) which

offers two advantages. The panel can supervise the keypad connection to indicate a trouble condition if it

is removed. Also keypads can be assigned to operate a specific partition or operate as a global keypad.

2.6.1 How to Assign Keypads

All keypad assignment must be done individually on each keypad on the system

To assign a keypad to a slot and select the partition it will operate, enter the following:

Step 1 — Enter Installer Programming

Step 2 — Press [000] for Keypad Programming

Step 3 — Press [0] for Partition and Slot Assignment

Enter a two digit number to specify the partition and slot assignment.

1st digit Enter 0 for Global Keypad;

Enter 1 for Partition 1 Keypad;

Enter 2 for Partition 2 Keypad

2nd digit Enter 1 to 8 for Slot Assignment

Press the [#] key twice to exit programming. Continue this procedure at each keypad until all have been

assigned to the correct slot.

2.6.2 How to Program Function Keys

Each of the 5 Function Keys on each keypad may be programmed for different operation on each keypad.

Step 1 - Enter Installer Programming.

Step 2 - Press [000] for Keypad Programming.

Step 3 - Enter [1] to [5] to select Function Key to program.

Step 4 - Enter the 2 digit number, [00] to [21] for option.

Step 5 - Continue from Step 3 until all Function Keys are programmed.

Step 6 - Press [#] key twice to exit Installer Programming.

For a complete list of Function Key options

See Section 3.5.1 “Function Key Options” .

2.7 Enable Supervision

Once all the Keybus connections have been made, supervision must be enabled so the panel can

indicate a trouble if a module is removed from the system.

To enable supervision, enter the following at any keypad:

Step 1 - Press [✱] [8] [Installer Code] to enter Installer Programming.

Step 2 - Press [902] to enable supervision. The panel will automatically search for all modules on the

system. Once the search (it will take about 1 minute) is complete enter the following to confirm

the modules on the system.

Step 3 - Press [903] to display all modules.

Zone lights will be turned on according to what modules the panel has found on the system. The LCD

keypad will allow you to scroll through the modules. Refer to the following chart:

Light [1] ....... Keypad 1 present Light [13] ....... Zones 25 to 28 present

Light [2] ....... Keypad 2 present Light [14] ....... Zones 29 to 32 present

Light [3] ....... Keypad 3 present Light [15] ....... N/A (not used)

Light [4] ....... Keypad 4 present Light [16] ....... N/A (not used)

Light [5] ....... Keypad 5 present Light [17] ....... Module PC5132 present

Light [6] ....... Keypad 6 present Light [18] ....... Module PC5208 present

Light [7] ....... Keypad 7 present Light [19] ....... Module PC5204 present

Light [8] ....... Keypad 8 present Light [20] ....... Module PC5400 present

Light [9] ....... Zones 9 to 12 present Light [21] ....... Module PC5928 present

Light [10] ....... Zones 13 to 16 present Light [22] ....... Module LINKS2X50 present

Light [11] ....... Zones 17 to 20 present Light [23] ....... N/A

Light [12] ....... Zones 21 to 24 present Light [24] ....... Escort5580 module present

If a module is connected but does not show as being present, it may be due to any of the following reasons:

• it is not connected to the Keybus

• if there is a Keybus wiring problem

• if the module is more than 1,000'/305m from the panel

• if the module does not have enough power

• if the PC5132 does not have any devices added

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Comments to this Manuals

No comments

DSC PC 5010 Specifications Page 9

Comments to this Manuals

Related products and manuals for Security access control systems DSC PC 5010