DSC PC 5010 Specifications download pdf (Page 23)

Program Descriptions

S E C T I O N 5

The following section explains all the programmable features including how the feature operates, options that

pertain to the feature and a summary of program locations that require programming.

5.1 Zone Definitions

These sections will allow you to select how each of the 32 zones will operate. Each zone requires a 2

digit entry.

In addition to selecting how each zone will operate, attributes may be programmed by zone (See

Section 5.2 “Zone Attributes”).

[00] Null Zone The zone will not operate in any way. Zones that are not used should be programmed as Null zones.

[01] Delay 1 Zone If this zone is violated when the panel is armed it will provide entry delay. The keypad

buzzer will sound to warn the user that the system must be disarmed. If the panel is not disarmed

before the entry delay expires an alarm will be generated. Typically this type of zone will be used for

the front door, back door or any other entry/exit point. Refer to Section [005], “System Times”, to

program the Delay 1 zone entry delay time.

[02] Delay 2 Zone This zone type operates the same as the Delay 1 zone option but can provide a different

entry delay. Typically this zone will be used for a garage door. Refer to Section [005], “System Times”, to

program the Delay 2 zone entry delay.

[03] Instant Zone If this zone type is violated when the panel is armed it will cause an instant alarm. Typically

this zone is used for windows, patio doors or other perimeter type zones.

[04] Interior Zone If this type of zone is violated when the panel is armed it will provide entry if a delay type

zone was violated first. Otherwise it will cause an instant alarm. Typically this zone is used for interior

protection devices, such as motion detectors.

[05] Interior Stay/Away Zone This zone type works the same as the Interior zone type with one exception.

The zone will be automatically bypassed under the following conditions:

• the panel is armed in the Stay Mode

(See Section 3.5 “Function Keys”)

• the panel is armed without entry delay

(See Section 3.4 “[

✱

] Commands, [

✱

] [9]”)

• the panel is armed with an access code and during the exit delay a Delay type zone is NOT tripped

The automatic bypass avoids having the user manually bypass interior type zones when arming at home.

If automatically bypassed, the user can reactivate the zones by entering the [✱][1] command

(See

Section 3.4 “[

✱

] Commands, [

✱

][1] Zone Bypass”)

. Typically this zone is used for interior protection

devices, such as motion detectors. Stay/Away zones should not be programmed as global zones.

[06] Delay Stay/Away Zone This zone type will operate the same as the Interior Stay/Away zone type except

that it will always provide entry delay. Typically this zone is used for interior protection devices, such as

motion detectors and will help prevent false alarms since it will always provide the user the entry delay

time to turn off the panel. Stay/Away zones should not be programmed as global zones.

[07] Delayed 24 Hour Fire Zone If this zone is violated the alarm output will immediately activate but the

communicator will be delayed for 30 seconds. If during the 30 second delay the user presses any key on

any keypad the alarm output and communicator will be delayed an additional 90 seconds, providing the

user time to correct the problem. If after the 90 second delay the zone is still violated the process will

begin again; the alarm output will be activated but the communication will be delayed 30 seconds.

If the user does not press a key, after 30 seconds the alarm output will latch and the panel will communicate.

The alarm will sound for the Bell Cutoff time programmed in

Section [005],

or can be programmed to sound

until a valid code is entered,

Section [014], Option [8]”

PGM outputs programmed as [10] “Latched System Event” will only activate after the Delayed 24 Hour

Fire zone has latched.

If a second Fire type zone is violated or the Fire keys are pressed during the delay time the panel will

latch the alarm output and communicate immediately.

Do not wire Fire zones on keypad zone terminals if the DEOL supervision option is enabled for the

panel (section [013], option [2]).

If a delayed Fire zone is violated it will be displayed on all keypads and can be delayed at any keypad.

Typically this zone is used for latching smoke detectors.

[08] Standard 24 Hour Fire Zone When violated the panel will immediately latch the alarm output and

communicate to central station. The alarm will sound for the Bell Cutoff time programmed in

Section [005],

can be programmed to sound until a valid code is entered,

Section [014], Option [8]”

If a Fire zone is violated it will be displayed on all keypads. Typically this zone is used for pull stations.

Do not wire Fire zones on keypad zone terminals if the DEOL supervision option is enabled for the

panel (section [013], option [2]).

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Comments to this Manuals

No comments

DSC PC 5010 Specifications Page 23

Comments to this Manuals

Related products and manuals for Security access control systems DSC PC 5010