DSC PC1150 Installation Manual download pdf (Page 27)

1321

5th System Option Code

Refer to Section

[12]

for programming instructions.

LIGHT

[II

ON =

. OFF =

ON =

. OFF =

[31

ON =

. OFF =

[41

ON =

l OFF =

[RI

ON =

l OFF =

[Al

ON =

. OFF =

Loss of AC will not cause an AC trouble

Loss of AC will cause AC

troublem

No siren during Auto-Arm

1 burst of siren every 10 seconds during Auto-arm pre-alert

Home-Away zones will have an entry delay when tripped

Home-Away zones act as interior when tripped

Quick-Exit is enabled

([%][O]

ignores one activation of a delay zone)

Quick-Exit is disabled

Auxiliary Delay zones can be force armed

Auxiliary Delay zones cannot be force armed

All zones except fire will be bypassed for 60 seconds upon power-up

All zones are active upon power-up

[R]

“Ready” light; [A] = “Armed” light

l Factory default

This feature must be enabled for UL installations.

[33]

Answering Machine Double

Cell

Timer

Refer to Section

[31]

Light 3. Section

[33]

determines the acceptable length of time between

the first

and

second

calls when using the answering machine override feature.

FOj

Installer’s Lockout Enable

With this feature enabled, the Installer’s Code and Downloading Access Code will not be restored to the default

setting when the panel’s programming is restored to its default settings through a software or hardware reset.

This feature is designed to prevent tampering with the installer’s programming sections.

A control panel with this feature enabled will click its phone line relay 10 times upon power-up to indicate that

the Installer’s Lockout is enabled.

Ensure that the new Installer’s Code has been entered correctly before enabling this feature. There is no way

to re-entering the installer’s programming mode without the new Installer’s Code.

[NJ

Installer’s Lockout Disable

Entering Section

[91]

when in the installer’s programming mode will disable the Installer’s Lockout feature.

NOTE: Panels returned to DSC with the Installer’s Lockout feature enabled and no other apparent problems

will be subject to an additional service charge.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 37 38

Comments to this Manuals

No comments

DSC PC1150 Installation Manual Page 27

Comments to this Manuals

Related products and manuals for Security access control systems DSC PC1150