DSC PTK5507 User Manual download pdf (Page 19)

System Test

The system’s Bell Output (2s), Keypad Lights and Communicator are tested. This test will also measure

the panel’s standby battery.

Auto-Arm/Disarm Control

Pressing Auto-Arm while in the User Function menu will enable (three beeps) or disable (one long

beep) the Auto-Arm and Auto-Disarm feature, by partition. With this feature enabled, the panel will

automatically arm in the Away mode (Stay/Away zones active) or disarm at the same time each day.

The Auto-Arm time is programmed with the Auto-Arm time button. Auto-Disarm must be programmed

by the system installer.

User Call-up

If enabled by the installer, the panel will make 1 attempt to call the downloading computer. The down-

loading computer must be waiting for the panel to call before downloading can be performed.

Keypad Configuration

Figure 13 - Keypad Configuration

Backlight – sets the brightness and screen timeout of the Touchscreen.

Buzzer Control – sets the buzzer volume of the Touchscreen.

Picture Frame – selects the pictures that will be displayed on the slideshow.

Calibration – calibrates the Touchscreen.

Clock Mode – displays the digital clock if there is no activity for 30 seconds.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

No comments

DSC PTK5507 User Manual Page 19