DSC PTK5507 User Manual download pdf (Page 14)

Troubles

When a trouble condition is detected, the Trouble ( ) or System indicator will turn on, and the keypad

will beep every 10 seconds. Press the ( ) key to silence the beeps. Press ( ) to view the trouble con-

dition. The Trouble (

) or System indicator will flash. The corresponding trouble will light up.

Troubles Comments Action

Service Required

(Press for more

details)

(1) Low Battery (2) Bell Circuit (3) General System

Trouble

(4) General

System Tamper (5) General Sys-

tem Supervision (6) RF Jam Detected (7) PC5204

Low Battery (8) PC5204 AC Loss

Call for service

AC Loss

If the building and/or neighborhood has lost elec-

trical power, the system will continue to operate

on battery for several hours.

Call for service

Phone Trouble

The system has detected that the telephone line is

disconnected.

Call for service

Communication

Failure

The system attempted to communicate with the

monitoring station, but failed. This may be due to

Telephone Line Fault.

Call for service

Zone Fault

The system is experiencing difficulties with one or

more sensors on the system. Press to display the

zone.

Call for service

Zone Tamper

The system has detected a tamper condition with

one or more sensors on the system. Press to display

the zone.

Call for service

Wireless Low Bat-

tery

The system has detected a low battery condition

with one or more modules/sensors on the system.

Press to display the zone, keypad, wireless key(s)

and RF Delinquency low battery conditions. Press

again to see zone troubles.

Call for service

Loss of Clock

If complete power was lost (AC and Battery), the

time and date will need to be reprogrammed.

Reprogram Time &

Date

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Comments to this Manuals

No comments

DSC PTK5507 User Manual Page 14

Comments to this Manuals

Related products and manuals for Security access control systems DSC PTK5507