DSC PowerSeries Self Contained Wireless Alarm System User's Guide download pdf (Page 8)

Remote Arming and Disarming

The system can be armed and/or disarmed (if programmed by the installer) using a remote control

device (wireless key). When arming the system by using the Arm button on the wireless key, the system

will acknowledge the command by sounding a single bell squawk and when disarming using the Dis-

arm button on the wireless key the system will acknowledge the command by sounding two bell

squawks . Three squawks heard when disarming with the disarm button indicates that that an alarm

occurred while the system was armed. If you are unsure of the cause of the alarm, proceed with cau-

tion.

Emergency Keys

Press the (F), (A) or (P) key for 2 seconds to generate a Fire, Auxiliary or Panic alarm. The

keypad sounder will beep indicating that the alarm input has been accepted and transmission to the

central station is underway. The (

P) key may or may not sound the bell depending on Installer

setup.

NOTE: The Fire keys can be disabled by the installer.

When Alarm Sounds

The system can generate 2 different alarm sounds:

• Continuous Siren = Intrusion (Burglary Alarm)

• Temporal / Pulsed Siren = Fire Alarm

Intrusion (Burglary) Alarm Continuous Siren

NOTE: If you are unsure of the source of the alarm, proceed with caution! If the alarm was

accidental, enter your Access Code to silence the alarm. If the alarm system is disarmed within the

programmed Abort Window (check with the installer if this option has been enabled on your system

and what is the transmitter delay time programmed), no alarm transmission to the Central Station

will occur. Starting at the end of the Abort Window there is a five minute Cancel window, during

which a user can cancel, by entering his access code, an alarm that has been previously transmitted.

A cancel signal will be transmitted to the Central Station and the alarm system will also annunciate

that the cancel signal was transmitted. Call your central station to avoid a dispatch.

Fire Alarm Pulsed Siren

Follow your emergency evacuation plan immediately!

If the fire alarm was accidental (i.e. burned toast, bathroom steam, etc.), enter your Access Code to

silence the alarm. Call your central station to avoid a dispatch.

2-Way Audio Operation (SCW9047 only)

If programmed by the installer, this feature allows the monitoring station to initiate a 2-way audio

session when an alarm has been received. This feature is used to verify the nature of the alarm or

determine the type of assistance required by the occupant.

NOTE: This feature can be initiated only by the monitoring station after an alarm has been

received. The user can not initiate a 2-way audio session.

Time & Date Programming

Press plus your Master Access Code to enter User Functions. Use the scroll keys to find

the menu option then press to select it. Enter the time in 24-hr. format (HH:MM), followed by the

date (MM:DD:YY). Press to exit programming. If you are viewing a ‘Loss of Clock’, trouble from

within the trouble menu ( ), press to directly enter Date and Time programming. See Trou-

ble Conditions on page 6),

NOTE: Your installer may have programmed your system to display the time and date while the key-

pad is idle. Press the key to clear the date and time display if desired.

Bypassing Zones

Use the zone bypassing feature when you need access to a protected area while the system is armed,

or when a zone is temporarily out of service, but you need to arm the system. Bypassed zones will

not be able to sound an alarm. Bypassing zones reduces the level of security. If you are bypassing a

zone because it is not working, call a service technician immediately so that the problem can be

resolved and your system returned to proper working order. Ensure that no zones are unintentionally

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Comments to this Manuals

No comments

DSC PowerSeries Self Contained Wireless Alarm System User's Guide Page 8

Comments to this Manuals

Related products and manuals for Security access control systems DSC PowerSeries Self Contained Wireless Alarm System