DSC Power632 PC1555MX Installation Manual download pdf (Page 5)

Section 1: System Introduction

1.1 Specifications

Downloading Software Support

• PC1555MX v2.3 uses DLS-3 v1.3 and higher.

Flexible Zone Configuration

• Six fully programmable zones

• System expandable to 32 zones using:

• up to 8 keypad zone inputs and/or

• up to 32 wireless zones with the PC5132 wireless expan-

sion module

• 38 access codes: one master code, one maintenance

code, two duress codes, two supervision codes and 32

general access codes

• 27 zone types; 8 programmable zone attributes

• Normally closed, single EOL and double EOL zone wiring

Audible Alarm Output

• 700mA supervised bell output (current limited at 3A),

12V

• Steady or pulsed output

EEPROM Memory

• Does not lose programming or system status on complete

AC and battery failure

Programmable Outputs

• One programmable voltage output and one programmable

voltage output/input; 23 programmable options

• PGM1 = 50mA; PGM2 = 300mA (50/300 products)

• PGM2 = 50mA; PGM2 = 50mA (50/50 products)

• Eight additional low current (50mA) outputs available using

the PC5208 module

• Four additional high current (300mA) outputs available

using the PC5204 module; one PC5204 output fully super-

vised for siren

Powerful 1.5 Amp Regulated Power Supply

• 550 mA auxiliary supply, 12 V

• Positive Temperature Coefficient (PTC) components

replace fuses

• Supervision for loss of AC power, low battery

• Internal clock locked to AC power frequency

Power Requirements

• Transformer = 16.5 V

AC, 40VA

• Battery = 12 volt 4Ah minimum rechargeable sealed lead

acid battery

• For household fire and burglary installations, two 7Ah bat-

teries in parallel must be used, providing 24 hours of

standby power and 4 minutes of alarm output power.

• For commercial burglary installations, a 4Ah (or larger) bat-

tery must be used, providing at least 4 hours of standby

power and 4 minutes of alarm output power.

NOTE: Do not install this panel outside of North America. By

design, this panel will not work if the AC line frequency drops

below 55.5Hz.

Remote Keypad Specifications

• Keypads available:

- PC5502Z2 2-zone LED keypad with 2-zone inputs

- PC5506 six zone LED keypad with zone input

- PC5508Z eight zone LED keypad with zone input

- PC5516Z sixteen zone LED keypad with zone input

- PC5532Z thirty-two zone LED keypad with zone input

- LCD5500Z alphanumeric keypad with zone input

- LCD5501Z fixed message LCD keypad with zone input

- LCD5501Z32 keypad / receiver

- SL-8 Slimline 8 zone LED keypad

• All keypads have five programmable function keys

• Connect up to eight keypads

• 4-wire (Quad) connection to Keybus

• Built in piezoelectric buzzer

Digital Communicator Specifications*

• Supports major communication formats including SIA and

Contact ID

• Digital communicator compatible receivers and their for-

mats:

Silent Knight Model 9000: 3/1, 4/1, 4/2 non-extended, 3/1

extended, 20 bps, 1400 Hz handshake.

Ademco Model 685: 3/1, 4/1, 4/2 non-extended, 3/1

extended, 20 bps, 1400 Hz handshake, Contact ID.

Sescoa Model 3000: 3/1, 4/1, 4/2 non-extended, 3/1

extended, 20 bps, 1400 Hz handshake.

Radionics Model D6500: 3/1, 4/2 non-extended, 3/1

extended, with or without parity, 1400 and 2300 Hz hand-

shake. Sur-Gard Model MLR2-DG: 3/1, 4/1, 4/2, without

parity, 20 bps, 1400 and 2300 Hz handshake, Contact ID,

SIA.

• Event-initiated personal paging

• Three programmable telephone numbers

• Two account numbers

• Supports LINKS1000 cellular communication

• Supports LINKS2X50 long range radio transmitter

• Supports Skyroute transceiver

• DTMF and pulse dialing

• DPDT line seizure

• Anti-jam feature

• Split reporting of selected transmissions to each telephone

number

System Supervision Features

The PC1555MX continuously monitors a number of possible

trouble conditions including:

• AC power failure• AUX Power Supply Trouble

• Fault by zone• Loss of internal clock

• Tamper by zone• Bell output trouble

• Fire trouble• Telephone line trouble

• Failure to communicate• Low battery condition (panel)

• Low battery by zone (wireless)

• Module fault (supervisory or tamper)

False Alarm Prevention Features

• Audible Exit Delay• Quick Exit

• Audible Exit Fault • Cross Zone Burglary Alarm

• Communication Delay• Rotating Keypress Buffer

• Urgency on Entry Delay• One Restart of Exit Delay

Additional Features

• Auto Arm at specified time

• Keypad-activated alarm output and communicator test

• All modules connect to the system via a four wire Keybus

up to 1000’/305m from main panel

• An event buffer which records the past 128 events with

both the time and date at which they occurred; buffer can

be printed using PC5400 serial interface module, or

viewed with the LCD5500Z keypad and DLS-3 software

• Supports the addition of the PC5132 wireless receiver for

integration of wireless devices

• Uploading and downloading capability

• Local downloading capability through the use of the

PC-Link adaptor

• Supports the Escort5580 Voice Prompt Module with auto-

mation/lighting control

• Supports the addition of the PC5928 Audio Interface Mod-

ule to integrate intercom stations

*LINKS2X50 has not been investigated by UL.

1 2 3 4 5 6 7 8 9 10 ... 51 52

Comments to this Manuals

No comments

DSC Power632 PC1555MX Installation Manual Page 5

Comments to this Manuals

Related products and manuals for Security access control systems DSC Power632 PC1555MX