DSC Power632 PC1555MX Installation Manual download pdf (Page 19)

4.4 Programming Toggle Option Sections

Some programming sections contain several toggle options.

The panel will use zone lights 1 through 8 to indicate if the dif-

ferent options are enabled or disabled. Press the number cor-

responding to the option to turn it ON or OFF. Once all the

toggle options have been selected correctly, press the [#] key

to exit the section and save the changes. The Ready light will

turn OFF and the Armed light will turn ON.

Refer to the Programming Worksheets in this manual to deter-

mine what each option represents and whether the light

should be ON or OFF for your application.

4.5 Viewing Programming

LED/Fixed Message LCD Keypads

Any programming section can be viewed from an LED key-

pad. When a programming section is entered, the keypad will

immediately display the first digit of information programmed

in that section.

The keypad displays the information using a binary format,

according to the following chart:

See Hex data

entry instructions

Press any of the Emergency keys (Fire, Auxiliary or Panic) to

advance to the next digit. When all the digits in a section have

been viewed, the panel will exit the section; the Ready light

will turn OFF and the Armed light will turn ON, waiting for the

next three-digit programming section number to be entered.

Press the [#] key to exit the section

LCD Keypad

When a programming section is entered, the keypad will

immediately display all the information programmed in that

section. Use the arrow keys (< >) to scroll through the data

being displayed. Scroll past the end of the data displayed or

press the [#] key to exit the section.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

No comments

DSC Power632 PC1555MX Installation Manual Page 19