DSC Power632 PC1555MX Installation Manual download pdf (Page 20)

Section 5: Program Descriptions

The following section explains the operation of all programma-

ble features and options and provides a summary of all corre-

sponding programming locations.

5.1 Programming Security Codes

There are three codes which can be programmed by the

installer in the installer programming function: the Master Code,

the Installer’s Code, and a Maintenance Code. All other access

codes can be programmed through the [*][5] command. (see

“[*][5] Programming Access Codes” )

The master code can also be programmed by the user as

access code (40). If the Master Code Not Changeable option

is enabled, the system master code can only be changed by

the installer.

The maintenance code can only be used to arm and disarm

the system. The maintenance code cannot bypass zones; use

[*][9] to arm the system, cancel auto-arming, or perform [*][7]

command functions. There will be no arm/disarm bell

squawks when the maintenance code is used.

General access codes can arm and disarm the system. When

the Code Required for Bypassing option is enabled, users

will need to enter a valid access code when bypassing zones.

Individual access codes can have the Zone Bypassing

attribute disabled under Access Code Attribute programming.

(see “[*][5] Programming Access Codes” )

If the 6-Digit User Access Codes option is enabled, all the

access codes can be programmed with six digits instead of

four, with the exception of the panel ID code and the down-

loading access code.

Installer’s Code . . . . . . . . . . . . . . . . . . . . . . . . . Section [006]

Master Code . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [007]

Maintenance Code . . . . . . . . . . . . . . . . . . . . . . Section [008]

Master Code Not Changeable . . . . . . . . . . Section [015]: [6]

Code Required for Bypassing . . . . . . . . . .Section [015]: [5]

6-digit User Access Codes . . . . . . . . . . . . .Section [701]: [5]

5.2 Zone Programming

Zones 1-8 are enabled by default. Disable unused zones, or

enable additional zones in programming sections [202] - [205].

The zone definitions describe how each of the zones you use

will operate. Program a two-digit code describing the zone

definition in sections [001] - [004]. Select a definition from the

list below.

In addition, each zone has eight different attributes which can

be programmed in sections [101] to [132]. (see 5.3“Zone

Attributes” )

Zone Definitions

[00] Null Zone

The zone is vacant. Unused zones should be programmed as

Null zones.

[01] Delay 1 Zone

This zone type, normally used for entry/exit doors, can be vio-

lated during the exit delay time without causing an alarm.

Once the exit delay has expired, opening the zone will start

the entry delay timer. During the entry delay time, the keypad

buzzer will sound steadily to advise the user that the system

delay should be disarmed. If the panel is disarmed before the

entry time expires, no alarm will be generated.

[02] Delay 2 Zone

The Delay 2 entry delay time can be set independently of

Delay 1 in programming section [005] (System Times).

[03] Instant Zone

This zone type will cause an instant alarm if it is violated when

the panel is armed. Typically, this zone is used for windows,

patio doors or other perimeter zones, and glassbreak detectors.

[04] Interior Zone

This zone will not cause an alarm if violated during the entry

delay. If the zone is violated before the entry delay has begun,

it will cause an instant alarm. Typically, this zone is used for

interior protection devices, such as motion detectors.

[05] Interior Stay/Away Zone

This zone type works similarly to the Interior zone type, except

that it will be automatically bypassed under the following con-

ditions:

• When the panel is armed in the Stay Mode. (see 3.5“Func-

tion Keys” )

• When the panel is armed without entry delay. (see “[*][9]

Arming Without Entry Delay” )

• When the panel is armed with an access code and a Delay

type zone is NOT tripped during the exit delay.

The automatic bypass prevents the user from having to manu-

ally bypass Interior zones when arming at home. This zone is

typically used for interior protection devices, such as motion

detectors.

[06] Delay Stay/Away Zone

This zone type will operate similarly to Interior Stay/Away

zones, except that it will always provide an entry delay. Typi-

cally, this zone is used for interior protection devices, such as

motion detectors. This zone option will help prevent false

alarms since it always provides an entry delay time for the

user to turn off the panel.

NOTE: Hardwired motion detectors covering entry/exit doors

that are using wireless transmitters must be programmed as

Delay Stay/Away. If not, the panel may see the motion detector

violation before the entry/exit transmitter has time to transmit to

the receiver, causing a false alarm.

[07] Delayed 24 Hour Fire Zone

NOTE: Do not wire Fire zones on keypad zone terminals if the

DEOL supervision option is enabled for the panel (see Pro-

gramming Worksheets, section [013], option [2]).

When this zone is violated, the alarm output will be immedi-

ately activated (pre-alert) but the communicator will be

delayed for 30 seconds. If the user presses any key on any

keypad during this delay, the alarm output and the communi-

cator will be delayed an additional 90 seconds, giving the

user time to correct the problem. If the zone is still violated

after the 90 second delay, the panel will sound the alarm out-

put and delay the communicator for 30 seconds.

If the user does not press a key during the 30 second pre-

alert, the alarm output will latch and the panel will communi-

cate the alarm to the central station. The alarm will sound until

the Bell Cutoff time expires (Section [005] ‘System Times’), or

until a code is entered. (see 5.13“Bell” )

NOTE: If a second fire zone is violated or if the fire keys are

pressed during the delay period, the panel will latch the alarm

output and will immediately communicate the alarm.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 51 52

Comments to this Manuals

No comments

DSC Power632 PC1555MX Installation Manual Page 20

Comments to this Manuals

Related products and manuals for Security access control systems DSC Power632 PC1555MX