DSC PC 5010 Installation Manual download pdf (Page 54)

Appendix A: Reporting Codes

The following tables contain Contact ID and Automatic

SIA format reporting codes. For more information on

reporting code formats and notes about individual

reporting codes,

(see section 5.6 ‘Communicator Pro-

gramming’ PWS Sect 6).

Contact ID

The first digit (in parentheses) will automatically be sent

by the control panel. The second two digits are pro-

grammed to indicate specific information about the sig-

nal. For example, if zone 1 is an entry/exit point, you

could program the event code as [34]. The central station

would receive the following:

*BURG - ENTRY/EXIT - 1 where the ’1’ indicates which

zone went into alarm.

SIA Format - Level 2 (Hardcoded)

The SIA communication format used in this product fol-

lows the level 2 specifications of the SIA Digital Commu-

nication Standard - October 1997. This format will send

the account code along with its data transmission. The

transmission will look similar to the following at the

receiver:

N Ri01 BA 01

N= New Event

Ri01 = Partition /Area Identifier

BA = Burglary Alarm

01 = Zone 1

NOTE:

A system event will use the Area Identifier Ri00.

Section # Reporting Code Code Sent When...

Dialer

Direction*

Automatic

Contact ID

Codes

SIA Auto Rep

Codes**

[320]-[321] Zone Alarms Zone goes into alarm A/R See Table 3 See Table 3

[324]-[325] Zone Restorals Alarm condition has been restored A/R

[328] Duress Alarm Duress code entered at keypad A/R (1) 21 HA-00

[328] Opening After Alarm System disarmed with alarm in memory A/R (4) A6 OR-00

[328] Recent Closing Alarm occurs within two minutes of system arming A/R (4) 59 CR-00

[328] Zone Expander Supervisory

Alarm/Rest.

Panel loses/restores supervisory transmission over the Keybus

from zone expansion modules, or keypads with zone inputs

A/R (1) 43 UA-00/UH-00

[328] Cross Zone (Police Code)

Alarm

Two zones on the same partition go into alarm during any given

armed-to-armed period (incl. 24-hr zones)

A/R (1) 39 BM-00/BV-00

[328] Burglary Not Verified This reporting code will be sent after the Burglary Verified Timer

expires after a zone alarm occurs.

A/R (3) 78 BG-00

[328] Alarm Cancelled This reporting code will be sent if a valid access code is entered

during the Alarm Cancel window

A/R (4) A6 BC-00

[329] [F] Key Alarm/Restoral Keypad fire alarm (alarm and restoral reporting codes sent

together)

A/R (1) 15 FA-00/FH-00

[329] [A] Key Alarm/Restoral Keypad auxiliary alarm (alarm and restoral reporting codes sent

together)

A/R (1) AA MA-00/MH-00

[329] [P] Key Alarm/Restoral Keypad panic alarm (alarm and restoral reporting codes sent

together)

A/R (1) 2A PA-00/PH-00

[329] Aux Input Alarm/Restoral

Option#23/24

: a panic button wired to PGM 2 is pressed/

access code is entered

Option #04:

a 2-wire smoke detector wired to PGM 2 goes

into alarm/alarm is cleared.

A/R

(1) 4A

(1) 11

UA-99/UH-99

FA-99/FH-99

[330]-[335] Zone Tamper/Restoral Zone is tampered / Tamper condition restored T/R (1) 44 TA-ZZ/TR-ZZ

[338] General System Tamper/Rest. Enrolled module with tamper inputs has a Tamper alarm/all

module Tampers restored

T/R (1) 45 TA-00/TR-00

[338] Keypad Lockout Maximum number of incorrect access codes has been entered

at a keypad

T/R (4) 21 JA-00

[339-341] Closings System armed (user 01-34, 40-42 indicated) O/C (4) A2 CL-UU

[341] Partial Closing One or more zones bypassed when system armed O/C (4) 7A CG-ZZ

[341] Special Closing Closing (arming) using one of the following methods: quick

arm, auto-arm, keyswitch, function key, maintenance code, DLS

software, wireless key

O/C (4) AA CL-00

[341] Late to Close Whenever the auto-arm pre-alert sounds (if the Late to Close

option is enabled)

O/C (4) A4 CI-00

[341] Exit Fault When Exit Fault Pre-Alert occurs and Entry Delay expires before

the system is disarmed

O/C (4) 57 EE-00

[342-344] Openings System disarmed (user 01-34, 40-42 indicated) O/C (4) A2 OP-UU

[344] Auto-arm Cancellation Auto-arm cancelled O/C (4) A5 CE-00

* A/R = alarms/restorals; T/R = tampers/restorals; O/C = openings/closings; MA/R = miscellaneous alarms/restorals; T = test transmissions

** UU = user number (user01-42); ZZ = zone number (01-32)

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60

Comments to this Manuals

No comments

DSC PC 5010 Installation Manual Page 54

Comments to this Manuals

Related products and manuals for Security access control systems DSC PC 5010