DSC PC 5010 Installation Manual download pdf (Page 34)

Appendix B: Programming LCD5501Z Keypads

There are several programming options available for the LCD5501Z keypad. These are described below. Record all your program-

ming choices in the programming worksheets included in this manual.

Programming Keypad Options

Programming the LCD5501Z is similar to programming the rest

of the system. To change the keypad programming:

1. Enter [*][8][Installer’s code]

2. Enter [000] to go to keypad programming

3. Enter section number [6] or [7].

4. To turn any of the options on or off, press the option number

(from [1] to [8]).

5. When you are finished programming, press [#].

When you are in the LCD5501Z programming sections, the key-

pad will display which options are turned on along the top of the

display. To turn an option on or off, press the number corre-

sponding to the option on the number pad. The numbers of the

options that are currently turned ON will be displayed.

For example, if options 1 and 2 are on, the display will look like:

Clock Options

The LCD5501Z will display the current time after 30 seconds of

no key presses. To set the correct time and date for the system,

please refer to the PowerSeries User Guide. You can change how

the keypad displays the time with options [1] to [3] in program-

ming section [6].

NOTE: If the Time does not display on keypad option is selected, make sure that the Keypad displays time when zones are open

option is also selected.

Alarms Displayed While Armed Option

You can disable the display of alarms on the keypad when the

system is armed. The display of alarms is enabled by default. To

disable the display of alarms when the system is armed, turn off

section [6], option [5].

Emergency Key Options

You can enable or disable the Fire, Auxiliary and Panic keys at

each keypad. These keys are enabled by default. Please see the

PC5010 CP-01 Installation Manual for more information on these

keys and their options. To turn any of the emergency keys on or

off on the keypad, enter section [7], and turn on or off options

[1] to [3].

Door Chime on Zone Openings/Closings

By default, LCD5501Z keypads are programmed to sound door

chimes on both zone openings and closings.

To change the door chime opening/closing settings, at each

LCD5501Z keypad, enter section [6], and turn on or off options

[6] and [7].

[6] LCD5501Z Keypad Options

Default Option On Off

I________I 1 Local Clock Display Enabled Local Clock Display Disabled

I________I 2 Local Clock Displays AM/PM Local Clock Displays 24-hour Time

OFF

I________I 3 Open Zones Override Clock Display Open Zones Do Not Override Clock

OFF

I________I 4 Scandinavian Approvals enabled Scandinavian Approvals disabled

OFF

I________I 5 Alarms Not Displayed While Armed Alarms Always Displayed While Armed

I________I 6 Door Chime Enabled for Zone Openings Door Chime Disabled for Zone Openings

I________I 7 Door Chime Enabled for Zone Closings Door Chime Disabled for Zone Closings

OFF

I________I 8 For Future Use

[7] Emergency Key Options

Default Option On Off

I________I 1 [F]ire Keys Enabled [F]ire Keys Disabled

I________I 2 [A]uxiliary Keys Enabled [A]uxiliary Keys Disabled

I________I 3 [Panic] Keys Enabled [P]anic Keys Disabled

OFF

I________I 4-8 For Future Use

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

DSC PC 5010 Installation Manual Page 34

Comments to this Manuals

Related products and manuals for Security access control systems DSC PC 5010