DSC PC 5010 Installation Manual download pdf (Page 11)

Basic Programming

[017] Fifth System Option Code

Default Option ON OFF

I________I 1 WLS Key Does Not Use Access Codes* WLS Key Uses Access Codes

OFF

I________I 2 RF Jam Log After 5 Minutes RF Jam Log After 30 Seconds

OFF

I________I 3 Audible RF Jam Trouble Beeps Silent RF Trouble Jam Beeps

OFF

I________I 4 Double Hit Enabled Double Hit Disabled

OFF

I________I 5 Late to Close Enabled Late to Close Disabled

OFF

I________I 6 Daylight Savings Time Enabled Daylight Savings Time Disabled

I________I 7 Periodic Camera Test Enabled Periodic Camera Test Disabled

OFF

I________I 8 Squawk on Away Key Arming/Disarming Only Bell Squawk on all Arming/Disarming‡

*This option must be enabled when using a PC5132 v2.1 or earlier. / ‡This option is supplemental to Section 14 Option 1

[018] Sixth System Option Code

Default Option ON OFF

OFF

I________I 1 Test Transmission Exception Enabled Test Transmission Exception Disabled

OFF

I________I 2 Verbal Chime Enabled Verbal Chime Disabled

OFF I________I 3 Verbal Alarm Enabled Verbal Alarm Disabled

OFF

I________I 4 Water-Flow Silence Inhibit Enabled Water-Flow Silence Inhibit Disabled

OFF

I________I 5 Keypad Buzzer Follows Bell Enabled Keypad Buzzer Follows Bell Disabled

OFF I________I 6 Cross Zoning Enabled Cross Zoning Disabled

I________I 7 Exit Delay Restart Enabled Exit Delay Restart Disabled

OFF

I________I 8 AC Trouble Beeps Enabled AC Trouble Beeps Disabled

NOTE: For Cross Zoning to function, Option[6] in Section [018] and Option [9] in Section [101]-[132] must be ON for the desired

zone. Each zone has the ability to protect the intended area. Cross Zoning is not recommended for line security installations or on

exit/entry zone types.

Keypad Zone Assignments

[020] Keypad Zone Assignments

NOTE: Only one keypad may be assigned to a zone.

Default

00 I________I_______I Keypad (slot 1) Zone Valid entries are zones 01-32

I________I_______I Keypad (slot 2) Zone Valid entries are zones 01-32

I________I_______I Keypad (slot 3) Zone Valid entries are zones 01-32

I________I_______I Keypad (slot 4) Zone Valid entries are zones 01-32

I________I_______I Keypad (slot 5) Zone Valid entries are zones 01-32

I________I_______I Keypad (slot 6) Zone Valid entries are zones 01-32

I________I_______I Keypad (slot 7) Zone Valid entries are zones 01-32

I________I_______I Keypad (slot 8) Zone Valid entries are zones 01-32

Zone Loop Response Option Code

[030] Sixth System Option Code

Default Option ON OFF

OFF I________I 1 Zone 1 is Fast Loop Response Zone 1 is Normal Loop Response

OFF

I________I 2 Zone 2 is Fast Loop Response Zone 2 is Normal Loop Response

OFF

I________I 3 Zone 3 is Fast Loop Response Zone 3 is Normal Loop Response

OFF

I________I 4 Zone 4 is Fast Loop Response Zone 4 is Normal Loop Response

OFF

I________I 5 Zone 5 is Fast Loop Response Zone 5 is Normal Loop Response

OFF

I________I 6 Zone 6 is Fast Loop Response Zone 6 is Normal Loop Response

OFF

I________I 7 Zone 7 is Fast Loop Response Zone 7 is Normal Loop Response

OFF

I________I 8 Zone 8 is Fast Loop Response Zone 8 is Normal Loop Response

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Comments to this Manuals

No comments

DSC PC 5010 Installation Manual Page 11

Comments to this Manuals

Related products and manuals for Security access control systems DSC PC 5010