DSC PC4020 - V3.3 Installation Manual download pdf (Page 59)

FCC COMPLIANCE STATEMENT

CAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd.

could void your authority to use this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interfer-ence in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that in-

terference will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be deter-mined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following meas-

ures:

• Re-orient the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/television technician for help.

The user may find the following booklet prepared by the FCC useful: "How to Identify and Re-

solve Radio/Television Interference Problems". This booklet is available from the U.S. Govern-

ment Printing Office, Wash-ington D.C. 20402, Stock # 004-000-00345-4.

IMPORTANT INFORMATION

This equipment complies with Part 68 of the FCC Rules. On the side of this equipment is a label

that contains, among other information, the FCC registration number and ringer equivalence

number (REN) for this equipment. If requested, this number must be provided to the Telephone

Company.

FCC Registration Number: F53CAN-20836-AL-E

REN: 0.1B

USOC Jack: RJ-31X

Telephone Connection Requirements

A plug and jack used to connect this equipment to the premises wiring and telephone network

must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A

compliant telephone cord and modular plug is provided with this product. It is designed to be

connected to a compatible modular jack that is also compliant. See installation instructions for

details.

Ringer Equivalence Number (REN)

The REN is used to determine the number of devices that may be connected to a telephone line.

Excessive RENs on a telephone line may result in the devices not ringing in response to an incom-

ing call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the

number of devices that may be connected to a line, as determined by the total RENs, contact the

local Telephone Company. For products approved after July 23, 2001, the REN for this product is

part of the product identifier that has the format.

US: AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03

is a REN of 0.3). For earlier products, the REN is separately shown on the label.

Incidence of Harm

If this equipment PC4020 causes harm to the telephone network, the telephone company will no-

tify you in advance that temporary discontinuance of service may be required. But if advance no-

tice is not practical, the Telephone Company will notify the customer as soon as possible. Also,

you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

Changes in Telephone Company Equipment or Facilities

The Telephone Company may make changes in its facilities, equipment, operations or proce-

dures that could affect the operation of the equipment. If this happens the Telephone Company

will provide advance notice in order for you to make necessary modifications to maintain unin-

terrupted service.

Equipment Maintenance Facility

If trouble is experienced with this equipment PC4020, for repair or warranty information, please

contact the facility indicated below. If the equipment is causing harm to the telephone network,

the Telephone Company may request that you disconnect the equipment until the problem is

solved. This equipment is of a type that is not intended to be repaired by the end user.

Simplex Time Recorder Co. 100 Simplex Drive, Westminster MA 01441-0001 USA,

Tel: (978) 731-2500

Additional Information

Connection to party line service is subject to state tariffs. Contact the state public utility commis-

sion, public service commission or corporation commission for information.

Alarm dialing equipment must be able to seize the telephone line and place a call in an emergen-

cy situation. It must be able to do this even if other equipment (telephone, answering system,

computer modem, etc.) already has the telephone line in use. To do so, alarm dialing equipment

must be connected to a properly installed RJ-31X jack that is electrically in series with and ahead

of all other equipment attached to the same telephone line. Proper installation is depicted in the

figure below. If you have any questions concerning these instructions, you should consult your

telephone company or a qualified installer about installing the RJ-31X jack and alarm dialing

equipment for you.

Telephone

Computer

Telephone

Fax Machine

Alarm Dialing

Equipment

RJ-31X

Jack

Unused

RJ-11 Jack

Telephone

Line

Network

Service

Provider's

Facilities

Customer Premises Equipment and Wiring

Unused

RJ-11 Jack

Network

Demarcation

Point

Answering

System

1 2 ... 54 55 56 57 58 59 60

Comments to this Manuals

No comments

DSC PC4020 - V3.3 Installation Manual Page 59

Comments to this Manuals

Related products and manuals for Fire protection DSC PC4020 - V3.3