DSC PC1500 - REV8 Instruction Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 10
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
Table of Contents
Introduction 1
About Your Security System 1
Trouble and Armed LED Displays 2
System Information 3
Master Code Description 4
Arming 4
“At-Home” Arming 5
Split Arming the Panel 5
Disarming 5
If an Alarm Sounds 6
Alarm Memory Display 6
Zone Bypassing 6
Viewing Trouble Conditions 7
LCD-600 Controls and Display Description 8
Testing 10
Keypad Zones 11
Quick-Arm Feature 11
Door Chime Feature 12
Alarm Test 12
Programming Security Codes 13
Master Code 13
Additional Codes 13
One-Time Use Code 14
Fire Alarm Operation 15
Fire Safety in the Home 15
Household Fire Safety Audit 15
Family Escape Planning 16
Maintenance
Limited Warranty
Maintenance
With normal use, the system requires minimum maintenance. The following points
should be observed.
1.Do not wash the security station with a wet cloth. Light dusting with a barely
damp cloth should remove normal accumulations of dust.
2.The battery/bell test is designed to determine battery condition, however it is
recommended that the stand-by batteries be replaced every three years.
3.For other system devices such as smoke detectors, passive infrared, ultrasonic
or microwave motion detectors or glassbreak detectors, consult the respective
manufacturer’s literature for testing and maintenance.
Limited Warranty
Digital Security Controls Ltd. warrants that for a period of twelve months from the
date of purchase, the product shall be free of defects in materials and
workmanship under normal use and that in fulfillment of any breach of such
warranty, Digital Security Controls Ltd. shall, at its option, repair or replace the
defective equipment upon return of the equipment to its factory. This warranty
applies only to defects in parts and workmanship and not to damage incurred in
shipping or handling, or damage due to causes beyond the control of Digital
Security Controls Ltd. Such as lightning, excessive voltage, mechanical shock,
water damage, or damage arising out of abuse, alteration or improper application
of the equipment.
The foregoing warranty shall apply only to the original buyer, and is and shall be
in lieu of any and all other warranties, whether expressed or implied and of all
other obligations or liabilities on the part of Digital Security Controls Ltd. This
warranty contains the entire warranty. Digital Security Controls Ltd. neither
assumes, nor authorizes any other person purporting to act on its behalf to modify
or to change this warranty, nor to assume for it any other warranty or liability
concerning this product.
In no event shall Digital Security Controls Ltd. be liable for any direct or indirect or
consequential damages, loss of anticipated profits, loss of time or any other
losses incurred by the buyer in connection with the purchase, installation or
operation or failure of this product.
Warning
Digital Security Controls Ltd. recommends that the entire system be completely
tested on a regular basis. However, despite frequent testing, and due to, but not
limited to, criminal tampering or electrical disruption, it is possible for this product
to fail to perform as expected.
Page view 1
1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments