DSC PC1500 - REV8 Instruction Manual download pdf (Page 5)

System Information

This system includes:

_________________ Control Panel model ________________________________

_________________

Security Station(s) model _________________________

_________________

Remote keypad(s) model_________________________

Master Security Code: 01 ______________________________________

There are __________ codes available on this system.

Additional Security Codes

02 ___________________ 03 ____________________ 04 ___________________

05 ___________________ 06 ____________________ 07 ___________________

08 ___________________ 09 ____________________ 10 ___________________

11 ___________________ 12 ____________________ 13 ___________________

14 ___________________ 15 ____________________ 16 ___________________

There are __________ active zones on this system.

Zone Protected Area Zone Type

1 ______________________________________ ________________________

2 ______________________________________ ________________________

3 ______________________________________ ________________________

4 ______________________________________ ________________________

5 ______________________________________ ________________________

6 ______________________________________ ________________________

7 ______________________________________ ________________________

8 ______________________________________ ________________________

9 ______________________________________ ________________________

10 ______________________________________ ________________________

11 ______________________________________ ________________________

12 ______________________________________ ________________________

13 ______________________________________ ________________________

14 ______________________________________ ________________________

15 ______________________________________ ________________________

16 ______________________________________ ________________________

FIRE ______________________________________ ________________________

[F] ______________________________________ Keypad Fire Zone

[A] ______________________________________ Keypad Auxiliary Zone

[P] ______________________________________ Keypad Panic Zone

Monitoring Station Information

Account # ____________________________________

Telephone #___________________________________

LCD-600

Use the scroll keys to find the access code you wish to add, change or delete.

PC1500/PC1550: There are 5 codes (2...6).

PC2500: There are 7 codes (2...8).

PC3000: There are 15 codes (02...16).

PC2550: Codes 2 through 8 are programmed like all others. For codes 9 to 16,

enter [✱] [5] [Master Code] [9] followed by [1] to [8], representing 9 to 16.

Then program codes. Remember, code number 1 is the Master Code and it should

not be deleted. Once you have chosen the code you wish to alter, enter that code

number, either [x], one digit for the PC1500, PC1550, PC2500, PC2550 or [xx], two

digits for the PC3000. The display will read..

Enter 4 Digit

Access Code...

Use digits 0 through 9 only for programming codes

To Add: Enter 4 digit code.

To Change: Enter 4 digit code.

To Delete: Enter “✱✱✱✱”.

Note: Once the 4 digit code or “✱✱✱✱” has been entered, the keypad

sounder will beep 3 times. If the codes programmed, the display will read..

Select Code < >

Code (xx) P

The “P” means the code has been programmed. If there is no “P” then that code is

deleted.

Press [#] to exit. Remember to record your new code on the System Information

page in this booklet.

One-Time Use Code

The One-time use code is designed to allow entry and exit to the premises for one

occasion only. The panel must be programmed by your installer for this option to

be enabled. On the PC2500, the 8th code is the One-time use code and on the

PC2550 and 3000 it will be the 16th code. On the PC1500 and 1550 the 6th code is

the One-time use code.

To use this option, enter your selected One-time code as the last user code for the

system using the procedure described above. When you leave the premises, arm

the system with any user code or the Master Code except the newly entered One-

time code. This One-time code is given to a person (maid) who will enter the

premises while the system is armed and you are away.

The One-time user enters the premises and disarms the panel with the One-time

code. Upon leaving, the same code is used to arm the system. As soon as the

system is armed, the One-time code is erased and cannot be used again to re-

enter the premises. A different code can be provided each time for the One-time

user.

Note: Quick Arm must not be enabled when the One-time use code is

programmed for operation.

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

DSC PC1500 - REV8 Instruction Manual Page 5

Comments to this Manuals

Related products and manuals for Fire protection DSC PC1500 - REV8