DSC PC 5010 Technical Information download pdf (Page 13)

Door Chime Feature

The door chime feature is used, while the panel is disarmed, to provide a tone from the keypad each

time a door or window is opened or closed. The doors and windows which will provide this indication

are programmed by your installer.

To activate the door chime from an LED Keypad:

Enter [✱][4] to turn the door chime feature ON and OFF. When the command is entered, the keypad

buzzer will beep 3 times if the door chime feature is enabled and will sound one long beep if it is

disabled. Press [#] to return to the Ready state.

To activate the door chime from an LCD Keypad:

Start with the panel in the disarmed mode, press [✱] to enter the function list, then scroll to find...

Press [✱] or [4] to enable or disable the Door Chime feature. Press [#] to return to

the Ready state.

Language Selection (LCD Keypads Only)

The displayed language of the keypad can be changed by pressing and holding both of the arrow (< >)

keys simultaneously. This will cause the keypad to enter the Language Selection mode. Scroll to the

desired language and press the [

✱] key. This will select the new language and restart the keypad.

Fire Alarm Operation

Alarm

On a fire alarm, the bell or siren will pulse ON and OFF. The transmission of the alarm to the central

station is delayed for 30 seconds. If the alarm is not cleared within the 30 second delay, it will then be

transmitted to the central station.

Silence

To silence the bell or siren, press the [#] key. If the alarm is silenced and the smoke detector is not

reset, the alarm will resound after 90 seconds.

Resetting Smoke Detectors

Once the smoke detector is reset, if it still detects smoke, the alarm sequence will resound as

described above. If there is no smoke, the system will return to normal.

To reset smoke detectors from an LED Keypad:

Press [✱][7][2].

To reset smoke detectors from an LCD Keypad:

Press [✱] to enter the function list. Scroll to find:

Press [✱] to select the output control. The display will read...

Use the arrow (< >) keys to find the following message and press the [✱] key to

select...

NOTES: If you suspect that a fire alarm has transmitted and that there is no fire condition, call

the central station to avoid an unnecessary response.

If a fire condition is apparent, follow your

evacuation plan immediately. If the alarm sounds at night, evacuate immediately.

The description above may not be applicable depending on how your installer has programmed

the fire alarm operations on your system. Ask your installer for more information regarding your

system's operation.

Press (*) For<>

Door Chime

Select Output<>

Utility Output

Select Output<>

Sensor Reset

Press (*) For<>

Output Control

1 2 ... 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments

DSC PC 5010 Technical Information Page 13

Comments to this Manuals

Related products and manuals for Security access control systems DSC PC 5010