1TABLE OF CONTENTSSYSTEM INFORMATION 2INTRODUCTION 3Test Your System Regularly ...
10CHANGING SYSTEM FEATURESChanging Access CodesThe PC510 features 4 programmable Access Codes. The first code is the Master Code, and the remainingth
11TESTINGBell TestEntering this command will sound the siren and turn ON all the keypad lights for 2 seconds. To perform abell test, enter [∗][4] on
12MAINTENANCEWith normal use, your system requires a minimum of maintenance. The following points should beobserved:1 Do not wash the keypad with a we
13LIMITED WARRANTYDigital Security Controls Ltd.’s liability for failure to repair the prod-uct under this warranty after a reasonable number of attem
© 1997 Digital Security Controls Ltd.1645 Flint Road, Downsview, Ontario, Canada M3J 2J6Printed in Canada 29000862 R1
InstructionManualPC51O• W A R N I N G •This manual contains information on limitations regarding product use andfunction and information on the limita
WARNING Please Read CarefullyNote to InstallersThis warning contains vital information. As the only individual in contactwith system users, it is your
2SYSTEM INFORMATIONInstaller ___________________________________________________________________________________Phone ________________________________
3INTRODUCTIONRead this manual carefully before operating your security system. Have your installer instruct you onsystem operation, and have your ins
4BASIC OPERATIONArming Your SystemBefore arming the system, close all protected doors and windows, and stop movement in areas protectedby motion detec
5Bypassing ZonesA “bypassed” zone will not cause an alarm. Zones may be bypassed to allow access to part of theprotected area while other zones are a
6ARMING OPTIONSAbout Home-Away ZonesSome zones on your system may be programmed as Home-Away Zones so that you may use the ArmingOptions described on
7SL-40 KEYPADZone Lights 1 to 4 indicate zone activity.When a zone is secure, its Zone Light will beOFF; when a zone is open, its Zone Light will beO
8PC500RK KEYPADImportant:Follow the instructions in the manual to test your system weekly. Follow theguidelines for correcting system trouble conditi
9DISPLAYING SYSTEM INFORMATIONSystem LightThe “System” light will come ON when:• there are Bypassed Zones on the system• there are alarms in Alarm Mem
Comments to this Manuals