Main Control Panel
• Support up to 32 zones using any combination of up to:
- 6 hardwire zones on main panel
- 8 keypad zones
- 32 wireless zones using PC5132-433 or LCD5501Z32-433 wireless
receiver module
• Zone programming
- all zones programmable as burglary or fire
- zone options include : Normally Closed loop, Single End of Line (EOL)
resistor, and Double EOL resistor(1)
(1)keypad zones cannot be programmed as fire zones and cannot support Double EOL
resistor supervision
- 27 programmable zone types, 8 programmable zone options
• Audible alarm output
- supervised bell output - 700mA @ 12Vdc, PTC protected, current
limited at 3A
- steady, pulsed, temporal pattern, or strobe fire output
- additional supervised siren output is available using PC5204 power
supply module
• Programmable voltage outputs
- 1 high current 300mA PGM… can also be used for 2 wire smoke
with a maximum of 20 detectors at 15mA per detector (Available on
some models)
- 1 low current 50mA PGM
- 8 additional low current PGM outputs using PC5208 module
- 4 additional high current PGM outputs using PC5204 module
- 24 programmable options
• Local PCLINK™ and remote upload/download capability
- program system using DLS software (version 6.5 or newer) via direct
PCLINK connection to control panel or remotely via modem
- view status and trouble conditions, and system 128 event buffer
- remote access can be controlled by owner to prevent unauthorized
access to system
- user call-up feature
• Power Supply
- 550mA @ 12.5Vdc auxiliary power (400mA for UL applications)
- positive temperature coefficient (PTC) protected battery, AUX, and
Bell output
- electronic protection of KEYBUS
- supervision of AC power loss, low battery, auxiliary power failure
- internal clock locked to AC power frequency
• EEPROM memory
- will not lose programming or system status on complete AC and
battery failure
• Digital communicator
- supports all major formats including SIA & Contact ID
- supports Skyroute cellular communications
- 3 phone numbers (3rd backs up primary)
- 2 account numbers
- DTMF or pulse dialing
- DPDT line seizure
- anti-jam feature
- split reporting of selected events to each telephone number
- event initiated personal paging
• Battery required: 12V, 4Ah, rechargeable sealed lead acid
• Transformer required: 16.5Vac, 40VA
Interfaces
Keypads
· Zone input connects detector directly to keypad to avoid separate
wiring back to control panel
· 5 one-touch function keys with many programmable options...
Stay arm, Away arm, Quick Exit, etc.
· LED status indicators... Ready, Armed, Trouble (alarm status
at a glance)
· Fully backlit with backlighting boost to provide extra lighting
when a key is pressed
· Piezo buzzer provides audible feedback for correct key entries,
pre-alert, and system trouble status with adjustable buzzer tone
· Connect to 4-wire Keybus up to 1000’ (305m) from the panel
LCD5500Z Programmable Message LCD Keypad
· Large 32-character programmable alphanumeric display
provides plain language… zone identification, system status,
trouble conditions, system instructions, 128-event buffer
· 12 or 24 hour clock display
· Specifications
- Dimensions: 5.75”W x 4.5”H x 1”D (144 x 114 x 25mm)
- Current draw: 85mA (maximum)
LCD5501Z Fixed Message LCD Keypad with Optional
Integrated PC5132 Wireless Receiver
· Easy to read LCD display provides real-time status of all panel
activity using icons (symbols)
· 12 or 24 hour clock display
· 4 selectable door chime options, programmable by zone
- also available with a built-in 32 zone 433MHz wireless receiver
· Specifications
- Dimensions: 5.75”W x 4.5”H x 1”D (144 x 114 x 25mm)
- Current draw: 140mA (maximum) LCD5501Z 210mA
(maximum) (LCD5501Z32)
PC5508/16/32 LED Keypads
• Additional LED indicators: Memory, Bypass, Fire, Program
• 4 keypad-activated alarms…Panic, Auxiliary, Fire, and Duress
• Specifications
- Dimensions: 5.75"W x 4.5"H x 1"D (144 x 114 x 25mm)
- Current draw: 85mA with backlighting boost
Reporting Interface
PC5400 Printer Interface Module
• Provides RS232 serial printer connection for report of events
logged to the system event buffer ... prints event, partition, time
and date that event occurred
• Supports any 300, 1200, 2400, or 4800 BPS serial printer
• Connect printer up to 200’ (61m) from PC5400
• Connect PC5400 up to 1000’ (305m) from control panel via
KEYBUS
• Maximum one module per system
• Specifications
- Current draw: 65 mA @ 12VDC
Comments to this Manuals